Electrical Switch
Gear
The Cubicle On Load Changeover Switch
Features :
-
Range : 63-3150A, 4 Pole, 415 V AC
-
Tested at CPRI Bhopal for AC 23 duty
-
Compact Body of fibre glass, reinforced polyester resin
-
Silver plated current carrying parts
-
Entire range with single composite handle
-
Flexibility for termination of supply
-
Mounting possible in both horizontal & vertical position
-
Available in Open Execution / Sheet Steel enclosure
-
Auxilary contacts upto 2 NO. NC.
-
Bolt holders for easy installation
|
 |
Switch Fuse Changeover 4Pole
Features :
-
Range : 125A-630A, 4Pole, 415V AC as per IS 13947-93 (P-3)
-
Body of fibre glass inforced polyester resin
-
Auxilary contact upto 2 NO. NC.
-
Quick make and quick break mechanism
-
Protection against over current and short circuit faults by fuses of high rupturing capacity of 80kA rms
-
Bolt holders for easy installation
|
 |
Motorised Changeover Switch
|
Features :
-
Suitable for AMF panel/ Automatic transfer switch
-
Remotely operated
-
Provides Safety to the operator
-
Facilities auxilliary contacts for pre breaks/position
indication
-
Manual operation possible in case of emergency /
failure of control supply
-
Padlocking possible in 'OFF' position only
-
Padlocking deactivates electrical control circuit
-
Provides two stable position I or II
-
Certified for AC-23A utilization category
|
|
OnLoad Bypass Switch
Features:
-
Range : 125A - 630A, 4 Pole, 415 V AC as per IS 13947-93 (P-3)
-
Tested for AC-23A utilization category
-
Switch is designed for specific need in IT Industries where UPS and Servo stabilizer provides main source of supply
-
Auxilary contacts upto 2 NO. NC.
-
Bolt holders for easy installation
|
 |
Switch Disconnector Fuse
Features :
-
Range : 32A to 800A, TP, TPN & $ Pole, 415V, 50Hz
-
Conforms to latest IS 13947-3 / IEC 947-3
-
Tested at CPRI, Bhopal for AC-23A duty
-
Multiple Roller Contact Mechanism for long life and better performance
-
Available in open execution and sheet steel enclosure
-
Available in BS & DIN type HRC fuse fittings
|
 |
Cam Operated Rotary Switches
Features:
-
Range : 6A to 63Amp.
-
Tested at CPRI for AC23A duty
-
Finger protection as per VDE 01006
-
Self lifting terminals
-
Padlock devices and key operated as added feature
-
Door interlocking and door coupler facility
-
DIN rail mounting
-
Specific application switches
|
 |
HPL Techno Miniature Circuit Breakers
Features :
- Range : 0.5 to 63 Amps 240/415V
-
Available in SP, SPN, DP, TP, TPN & FP
-
ISI marked & COnforms to IS:8828'96/IEC 898
-
High breaking capacity 10 KA
-
Consistent Performance
-
Dual protection against Short circuit & Over load
-
Mid trip facility
-
Low let through energy & low watt loss
-
Finger touch proof
-
Trip free Mechanism
-
Available in B & C curve
-
DC MCB's also available
Miniature Circuit Breakers & Isolators
Residual Current Circuit Breakers
| Miniature Circuit
Breakers & Isolators
MCB PLSM, PLZM
- Rated current upto 63 A.
- Trapping Characteristics C, D.
- Rated Breaking Capacity 10 kA.
- Comprehensive range of accessories.
- Contact position indicator RED - GREEN.
- Three position DIN rail clip, permits easy removal.
|
|
MCB PLHT
- Rated current upto 125 A.
- Tripping Characteristics C, D.
- Rated Breaking Capacity 25 kA.
- Comprehensive range of accessories.
- Contact position indicator RED - GREEN.
MCB PLS6DC
- Rated current upto 50 A.
- Tripping Characteristics C.
- Rated Breaking capacity 6 kA.
Isolators
- Rated current upto 100 A.
- Available in 1P, 2P, 3P, 4P versions.
Residual Current Circuit
Breakers
RCCB PIFM
- Rated Current upto 80 A.
- Available in 2P & 4P versions.
- Suitable for fault current / Residual current
protection & additional protection.
- Conditionally surge current-proof 250 A, Type AC,
Type A, Type S/A.
RCCB PIFM - U
- Rated current upto 40 &63 A
- Suitable for fault current / Residual current
protection & additioonal protection
- For frequency converter application Type U
RCCB PIFM - X
- Rated current 40 A.
- Suitable for fault current / Residual current
protection & additional protection.
- Conditionally surge current-proof 250 A, Type AC,
Type G, Type S, Type U.
Residual Current Relays - PFR
- Especially matched relay & core balance
Transformers.
- Nominal fault current 0.3 A & 1 A.
- Standard (-S/A) and frequency converter proof (-U)
model.
RCCB PFHM
- Rated current upto 63 A.
- High comfort RCCB - No monthly test required.
- Integrated overload protection.
- Conditionally surge current proof 3 kA / 5 kA Type
G, Type S.
- High security against unwanted tripping.
RCCB PFNM
- Rated Current for 100 A.
- Suitable for fault current / Residual current
protection & additional protection.
- Conditionally surge current-proof 250 A, Type AC,
Type G, Type S, Type U.
RCCB PFDM
- Rated current for 125 A.
- Suitable for fault current / Residual current
protection & additional protection.
- Conditionally surge current-proof (0.5 µs /100kHz
ring-wave test) Type AC, Type A, Type S/A.
RCCB PBHT
- Rated current of 80A & 125 A.
- Suitable for fault current / Residual current
protection & additional protection.
- Conditionally surge current-proof 250A Type AC, Type
A, type S/A.
HPL - HRC Fuse - DIN Type Contacts
|
Features :
-
Range : 2 Amps to 630 Amps in four different sizes with breaking capacity of 80kA at 415V, 50Hz AC
-
Conforms to Indian & International Standards IS : 9224 & IEC 269 - 1986
Tested at : CPRI Bhopal
-
Low power loss
|
|
HPL - HRC Fuse - Bolted type Contacts
|
Features :
- Range : 2 Amps to 630 Amps in four different sizes with breaking capacity of 80kA at 415V, 50Hz AC
-
Conforms to Indian & International Standards IS : 9224 & IEC 269 - 1986
Tested at : CPRI Bhopal
-
Low power loss
|
|
|
